Sizes Available in the **NEW**
Detectamet Standard Tag
range are as follows:
48mm x 279mm
(Minimum order quantity is
500 tags)
25mm x 190mm
(Minimum order quantity is
500 tags)
Colours Available
Pantone
Yellow, Pantone Orange, Red
032, Rhodamine
Red (Magenta),White,
Blue 291, Green 382, Brown
125, & Black
Detectamet Tag Standard -
Our standard product, with
good heat, strength
resistance and all round
durability - this tag will
suit 80% of applications.
Please contact us for
product samples.
Detectamet Tag is a quad
laminate material used for
tags designed for the food
processing environments and
detectable by end of line
metal detectors.
Detectamet Tag has an 80g
thermal transfer printable
mid-gloss face paper on one
side and an uncoated writing
paper on the other side,
sandwiching a special
metal-detectable aluminium
foil and a synthetic
strengthening layer.
Resistant to delaminating
(especially in acid
products) Minimal swarf at
perforation, Identification
of products by wrapping
around tray handles, but not
intended for direct food
contact.
|
Detectamet |
offers a
complete range
of
identification
and traceability
labels and tags
used
specifically
within the food
processing
industry |
|
 |
|
Detectamet |
Stands for
‘TOTAL
TRACEABILITY’.
From the
farmer’s field
to the
consumer’s plate |
|
 |
|
Detectamet |
100% metal
detectable
labels and tags
have been tested
and approved for
metal detection
to 0.5mm˛ by
leading metal
detector
manufacturers |
|
 |
|
Detectamet |
Offers a
range of
specialist
materials,
developed by ECC/Detectamet
over the past
few years, for
both adhesive
and
non-adhesive, to
cover all
conditions and
applications
i.e. ovens,
freezers, wet
and chilled
conditions |
|
 |
|
Detectamet |
Labels and
tags can be
ordered from our
standard ranges
or customised to
suit individual
requirements |
1.
Has 2005 EU Food Traceability Legislation affected your business?
2.
. Do you use a colour coded identification system?
3.
. Do you use non-metal detectable tags or labels?
4.
Are you looking to install or change your current traceability
system?
5.
. Are you looking to improve your current traceability system?
If you can answer YES to any of the above questions then you need
Detectamet labels and Tags
please see the following
information below to
identify the right Tag for
your application.
Detectamet XV Tag DTM
0920T and
Detectamet XV DTM 0921T
(available with and
without print - various
sizes and options
available)
To work in conjunction
with our range of
Detectamet Standard Tags
we are to offer our
customers the
Detectamet X Tag and
the Detectamet XV Tag.
For customers who have
an environment with
particularly high heat
and steam areas.
Please contact us for
samples etc.
Our ref:Detectamet
X Tag
DTM 0920T
Material : (Extra
reinforced metal
detectable card)
Label Size and Type:
38 x 219.075mm
continuous non-adhesive
tag, waisted and hole
punched with
perforations between
each tag.
(Alternative sizes are
available - this is the
most popular size at
present)
Printing:
Nil (option to print is
available)
Presentation:
On rolls x 500 wound
face out, narrow edge
(foot) leading on 76mm
plastic id cores.
OPTION B
Our ref:
Detectamet XV
DTM 0921T
Material : Value
Extra reinforced metal
detectable synthetic
material
Label Size and Type:
38 x 219.075mm
continuous non-adhesive
tag, waisted and hole
punched with
perforations between
each tag.
(Alternative sizes are
available - this is the
most popular size at
present)
Printing:
Nil (option to print is
available)
Presentation:
On rolls x 500 wound
face out, narrow edge
(foot) leading on 76mm
plastic id cores.
Min Quantity order:
5,000
Please note that all
orders for the
Detectamet X and
Detectamet XV tags are
classed as bespoke the
Detectamet Tags will be
produced to order on
completion of your
requirements.
|